Canon L380S - Manual (Page 115)

Special Dialing 10-3
Special F
eatures
10
2
To enter a pause within a number, press [Redial/Pause].
•
To enter a pause at the end of a number, press [Redial/Pause] ➞ press [OK].
•
A pause entered within a number (p) is 4 seconds long.
•
If necessary, you can adjust the length of a pause within a number. See p. 16-8 ( setting) for
more details.
•
To make a longer pause within a number, press [Redial/Pause] again. Each pause adds 2 seconds to the length
of the pause.
•
A pause at the end of a number (P) is fixed to 10 seconds.
Using Tone Dialing On a Pulse Line
Even if you have a pulse line, the machine enables you to use tone dialing once you have connected to
the number you are calling. This allows you to take advantage of many services that require tones,
such as selecting options from telephone “touch-line” services.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Lift the handset if you have installed the optional handset.
-or-
Press [Hook].
The In Use/Memory indicator blinks green and you will hear the dial tone.
3
Dial the telephone number using the numeric buttons.
The machine connects using the pulses required by your phone line.
4
Press [ ] to switch to tone dialing.
•
When [ ] is pressed, is displayed in the LCD.
•
Numbers entered after pressing [ ] will be dialed using tone dialing.
5
When you have finished, hang up the handset.
-or-
Press [Hook].