D.A.S. Audio DASnet V1.5 - Manual (Page 25)

presets control
delay control
gain control
On the “advanced view” parameters as gain/delay/preset/polarity/mute and solo are available:
- Load monitoring: for each amplifier channel there is a continuos impedance system
control that indicates if the speakers are working properlly(green) or not (red):
- Gain control: this control is for the complete cabinet (not per amplifier channel). From -20dB
to +6dB. Value can be entered using the keyboard or the gain control of the software.
- Delay control: this control is for the complete cabinet (not per amplifier channel). From 0ms
to 27ms.
- Presets: on the Road series two presets are available: Main and Monitor
- Polarity: inverts the polarity of the complete cabinet.
- Mute/Solo: per amplifier channel or per cabinet. When SOLO is activated ALL the other
devices on the net are muted.
when a speaker is not
working the device lits in
yellow
advanced device view window
DASnet - 25
With the Road series two presets are
avialble. By default (factory settings) the
cabinet is a wedge monitor and Monitor
preset is active. By pressing the button on
the cabinet or on the software Main preset
is activated (Main preset boosts low and
high end).