beautypg.com

ConvertiBARS Moto Guzzi: V11 Naked/Sport User Manual

Page 4

background image

STEP 7. Remove the 3- 6mm pinch screws from the top clamp. Remove the plastic cover
hiding the 8mm top nut and remove the top clamp. Install the Cyclops clamps under the
top clamp.
STEP 8. Reverse steps 1 thru 7. Use thread locking compound on all screws when
reassembling

The bars can be as high as 2.75” high and 1.6” back from stock position without changing
the stock steel hoses.

The bars can also be 2” lower and 1.6” forward.

Additional range can be achieved by using longer hoses.

Picture 1, Up and Back