ConvertiBARS Moto Guzzi: V11 Naked/Sport - Manual (Page 3)

STEP 4. Remove the 5mm Allen screws securing the clip on bars to the top clamp.
Loosen the 6mm screws on the clamp that secure the bars to the fork leg – remove the
bars.
STEP 5. There is a 12mm gap between the top of the Convertibars Cyclops clamp and the
top of the fork leg. If the fork legs are raised in the triple trees to provide the Cyclops
clamp full purchase on the fork legs the handing will change on the bike. OR mount the
Cyclops clamp under the top clamp.
STEP 6. Remove the instrument cluster by removing the 4-5mm screws located below
the Speedo. Remove the 4-5mm screws securing headlight mounts to the triple trees and
move the control line to a position between the fork leg and the headlight mounts.