Toshiba TEC MA-1100-400 SERIES - Manual (Page 33)

[PRESET PLU CODEl ^ IlC/VDl ->• ÎPÏÂÏ1 ->-
[OPEN PLU CODE I IlC/VDi [PRICE TO BE VOIDED | [AMTI ^----------
NOTES: 1. Designated voiding cannot be made on a department that has
been preset as a negative department.
2. Unless the "Credit Balance" option has been selected, voiding
to result the sale total into negative will gointo an error.
3* The [ IC/VD [ will function the same as the [ VOID [ key except
that;
1) [V0ID[ may be depressed before or after a numeric entry,
if before the motorized key (key to cause thé line item
print).
2) IIC/VD1 can only be depressed after a numeric entry. If
depressed at the top, it will item-correct the last item
just entered before the jIC/VD[ depression. Therefore,
in voiding a preset department entry, the quantity must
be entered first (if a normal entry, the quantity will be
"1"), next depress [IC/VDI. and then [PRESET DEPT I.
NON-ADD NUMBER PRINT (Mode Lock: REG, MGR, or 0)
[ number ! •>
L
(or [#/NS[ ) ->--
(Cheque No., Customer No., Credit Card No., etc.; max. 8 digits)
NOTES: 1. If the "Non-add Number Print Allowed Only Once" option has
been seleceted, a second non-add number entry in a sale will
result in an error.
2. The 0 key cannot be used to enter a non-add number.
SELECTIVE ITEMIZED (S.I.) STATUS MODIFICATION (Mode Lock: REG, MGR, or 0)
[WM[ [PRESET DE^[ ^---------
[ SI/MI [ price ! -* I OPEN DEPTI ->----
[Sl/M[ ^ [PRESET PLU code ! ^ IMAT[ -------
[ price ! fsiTMl OPEN PLU CODE ! plü 1 AMT
NOTE: If the department or PLU has been programmed with the S.I. status,
it will be reversed to non-S.I. status. If it has been programmed
with non-S.I. status, it will be reversed to the S.I. status by
the depression of the j SI/M[ key.
SELECTIVE ITEMIZED (S.I.) READ (Mode Lock: REG, MGR, or 0)
Dept, or PLU entries ...
\
SI/TL [ ->-The selective itemizer total
is displayed and printed on
the receipt.
- 29 -