Toshiba TEC MA-1100-400 SERIES User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If the "Total Validation Compulsory" option has been selected, the

Total Validation operation will always be required before finalizing

any sale.

The IAT/TLI key is also used to finalize received-on-account payments

or paid-out amounts.

The rAT/TLi key can be programmed with the HALC (High Amount Listing

Capacity) of the amount tendered. If the HALC has been set, the

amount tendered must not exceed the programmed value; otherwise, it

will result in an error. If the ILC OPE^j key is used prior to the

IAT/TLI depression, the HALC will be extended by one additional digit.

If an amount still larger must be entered, the MA or MGR key is

required to turn the Mode Lock to the MGR position.

|Wi SUB-TOTAL KEY

This key is used to obtain the sub-total amount during a sale. When

this key is depressed after all the items have been rung up, the sub

total of the seale is printed and displayed.

If the

key is depressed more than once consecutively , the first

depression

only

will

and

display

the

sub-total;

further

depressions will only display but not print the sub-total amount.

The system option provides the selection not to print but only display

the sub-total even on the first depression of the |ST

key.

Mandatory depression of this key prior to finalizing is a programmable

option.

In charge posting, a depression of the

amount without previous balance.

key displays the sub-total

iTRFj TRANSFER KEY

When a charge posting operation is ended with the |^hg| key, this

key is used to transfer the entire balance with no payment.

To operate, depress the ITOFI key after the IChgI key. All the

balance is transferred, the transferred amount is printed as the new

balance, and a receipt is issued. When the amount is less than 7

digits, the figures are printed in double-sized characters.

tSI/TL| SELECTIVE ITEMIZER TOTAL KEY

This key is used to display and print the selective itemizer content.

To operate, depress the ISI/TLI key without a numeric entry during

a sale. At this time the content of the selective itemizer is cleared

The

ITEM CQRR| key does not function to delete the |SI/TL| key entry.

- 19 -