Maintenance, Handling discs, Handling cassette tapes – JVC MX-J680V User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Maintenance
To get the best performance from the unit, keep your discs, tapes, and mechanism clean.
Handling discs
Remove the disc from its case by
holding it at the edge while pressing in
the center hole lightly.
Do not touch the shiny surface of the
disc, or bend the disc.
Put the disc back in its case after use to
prevent warping.
Handling cassette tapes
• If the tape is loose in its cassette, take
up the slack by inserting a pencil in
one of the reels and rotating.
• If the tape is loose, it may get
stretched, cut, or caught in the
cassette.
Be careful not to scratch the surface of
the disc when placing it back in its
case.
Avoid exposure to direct sunlight,
temperature extremes, and moisture.
To clean the disc
Wipe the disc with a soft cloth in a
straight line from center to edge.
Be careful not to touch the tape
surface.
Avoid storing tapes in the following
places.
— In dusty places
— In direct sunlight or heat
— In moist areas
— Near a magnet
DO NOT use any solvent — such as conventional
record cleaner, spray, thinner, or benzine — to
clean the disc.
- 2 9