To connect an outdoor am antenna, Terminal on the rear of the unit, 3 release the finger from the clamp – JVC MX-J680V User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AM antenna
Connecting Speakers
1 Connect the AM loop antenna to the AM
LOOP
terminals as illustrated.
2 T\irn the AM loop antenna until you have the
best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire
to the AM EXT terminal and extend it horizontally. (The AM
loop antenna must remain connected.)
For better reception of both FM and AM
Make sure the antenna conductors do not touch any other
terminals and connecting cords.
Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
terminal on the rear of the unit.
2
Insert the end of the speaker cord into the
terminal.
Match the polarity (color) of the speaker terminals: (J) to
0 and 0 to 0.
3
Release the finger from the clamp.
IMPORTANT; Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
- 7 -