JVC MX-J680V - Manual (Page 18)

Playing Back Audio CDs
Loading CDs
On the unit ONLY:
1
Press ^ for the disc tray (CDl to 3) ||=
you want to load a CD onto.
The unit automatically turns on and the disc ls=
tray slides out. The Powered Rolling Panel ir^
also opens automatically.
2
Place a disc correctly in the circle of the disc
tray, with its label side up.
CORRECT INCORRECT
• When using a CD single (8 cm), place it in the inner
circle of the disc tray.
3
Press the same ^ you have pressed |T 7 |
in step 1. ___
The disc tray closes, and the corresponding
disc indicator (CDl to CD3) lights up on the Im
display.
4
Repeat steps 1 to 3 to place other CDs.
When loading one CD after another
When you press ^for the next tray you want to place another CD
onto, the first disc tray automatically closes and the next tray slides
out.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
Disc number -
Disc indicator
Disc marker
The disc marker lights up for the disc number you have selected.
The disc indicator flashes while the corresponding CD is being
played.
The disc indicator goes off when the unit has detected that there is
no CD on the corresponding disc tray.
Playing Back Several Discs — Continuous
Play______________________________
You can play CDs continuously.
1
Load the CDs.
2
Press one of the disc number
buttons (CDl, CD2, and CD3) for
the disc you want to start play
from.
CD play starts from the first track of the
selected disc.
Tracks of the currently
playing disc
JUajAJ JJ
jjifij 11J12J
I3J14J
n- n
7.1
If-/ u ~/l fits
eeet isib ___
Wr e£gg fril til« 1V81 'WlTb
Track number Elapsed playing time
• Pressing CD ►/!! instead of the disc number buttons
starts play back if a CD is on one of the trays.
To stop during play, press ■ di.
To remove a disc, press ^ for the corresponding disc tray.
CD playback sequence
When 3 CDs are loaded on the disc trays, they are played in one of
the following sequences.
• When CDl is pressed: CDl ^ CD2 CDS (then stops)
• When CD2 is pressed: CD2 “=;> CD3 '=i' CDl (then stops)
• When CDS is pressed: CDS CDl CD2 (then stops)
• When only 2 CDs are loaded, they are played in the same order,
but the disc tray without a CD is skipped.
Basic CD Operations
While playing a CD, you can perform the following
operations.
To exchange CDs during playback of another disc
Press ^ corresponding to a CD, not playing or selected
currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not
stop until all CDs you have exchanged are played.
To stop play for a moment
Press CD ►/!!.
While pausing, the elapsed playing time flashes
cd
on the display.
To resume play, press CD ►/!! again.
- 1 3 -