JVC MX-J680V - Manual (Page 16)

Surround modes * *:
D.CLUB; Increases resonance and bass.
HALL:
Adds depth and brilliance to the sound.
STADIUM: Adds clarity and spreads the sound, like in an
outdoor stadium.
SEA (Sound Effect Amplifier) modes:
ROCK:
Boosts low and high frequency. Good for
acoustic music.
POP: Good for vocal music.
CLASSIC: Good for classical music.
Manual modes:
MANUAL 1/2/3:
Your individual mode stored in memory. See
“Creating Your Own Sound Mode — Manual
Mode.”
OFF: Cancels the sound mode.
• Surround elements are added to the SEA elements to create a
being-there feeling in your room.
When one of these modes is selected, the SOUND MODE
l„dic.,o,llsh,sup.s- ...... .... sound MODE IHIIIIII
When one of the SEA modes including manual modes (SEA
elements without surround elements) is selected,
it lights up as —
SOUND MODE
Creating Your Own Sound Mode — Manual
Mode________________________________
You can change SEA patterns to suit your preference. These
changed settings can be stored in the MANUAL 1, 2, and 3
modes.
• There is a time limit for performing the following steps. If
the setting is canceled before you finish, start from step 1
again.
• If you want to add the surround elements to your SEA
pattern, select one of the surround modes (D.CLUB,
HALL, or STADIUM) before starting the procedure below.
On the unit ONLY:
1
Press and hold SEA CONTROL
until “SEA CONT” appears on the
display.
SEA CO^m^OL
2
Adjust the SEA pattern.
1) Press or to select the
frequency range to adjust (LOW,
MID,fflGH).
2) Press ◄◄ or ►► to adjust the
level (-3 to +3) of the selected
frequency range.
3) Repeat steps 1) and 2) to adjust the level of
the other frequency ranges.
SEA CONTROL
4
Press or to select one of the
MANUAL 1, 2, and 3 modes into which you
want to store the SEA pattern.
5
Press SEA CONTROL again.
SEA CONTROL
The SOUND MODE indicator also lights up.
The SEA pattern you have created is stored into the
MANUAL mode selected in the above step.
To use your own sound mode
Select MANUAL 1, 2, or 3 mode when using the sound
modes. See “Selecting the Sound Modes” on page 10.
Current level appears.
- 1 1