JVC MX-J680V - Manual (Page 21)

Playing Back Video CDs/SVCDs
Selection of video input mode
Select the video output mode before you play the disc.
When you play an NTSC disc in MULTI mode on a PAL exclusive
TV, the image may be distorted. If this happens, change the mode to
PAL.
When you play an NTSC disc in MULTI mode on a Multisystem TV,
the image may blink for a moment. This symptom is caused by the
Unit detecting the formula of the disc, not by a malfunction of the
unit.
Selection of video output mode works only in standby mode.
Selecting Video Output (PAL, MULTI, NTSC)
Video output is preset for PAL.
To playback images correctly on your TV, select the video output
according to your TV system, select the proper video output
using the buttons on the Unit before you play a disc.
1
At standby mode.
^Press a disc number, button for more //^^l
than 2 sec. ™
CDS..........for NTSC exclusive TV. ^
CD2.......... for Multisystem TV. Iloo^
Multi detects the formula of the
disc (NTSC/PAL) automatically
and displays the image on the screen correctly.
CD1.......... for PAL exclusive TV.
3
Press
^
to close the tray.
“CD CLOSE” appears on the display.
r Tl r I n c c
L II L L LI _ / / _
4 Repeat steps 1 to 3 to place other discs onto the other
trays.
To continue putting discs onto other trays, even if a tray is
open, by pressing the ¿t button of another disc tray, the open
tray will close automatically, and the new tray will slide out.
When you place a CD onto the currently selected tray, whose
disc number shown on the CD indicator, reading of the CD
starts. After the reading is completed, the total number of tracks
and total playing time will appear, then the playing time of the
first track.
[ H I ^ I H
READING NOW Total number of tracks
and playing time
If you place a video CD, “VIDEO CD” will appear before the
playing time of the first track. If the video CD has the Playback
Control function when you press PBC button, “VCD PBC” will
appear.
To put an 8 cm CD onto a tray, insert it so that it is aligned with
the groove in the tray's center.
If a tray is open when the System switches to the standby mode,
the tray will close automatically.
/ С.-ЦП
) J- 1u
Playing lime of the
1st track
Loading CDs Playing a Video CD
7
Press A on the CD Player corresponding to the tray
you want to insert the disc into.
“CD OPEN” appears on the display and the disc tray slides
out.
Г Tl nor. / * /
L II LI I L hi
Сотри Play
When A is pressed while the power is on standby, the power is
automatically turned on.
2
Place a CD, with its label side up, onto the tray.
ATTENTION: To avoid malfunctions when you play a CD,
set the CD in the right place at the center of the tray.
You can play video CDs either with or without the PBC
function.
7
Itirn on the TV and select the video input so that
you can view the pictures from the CD player.
Refer to the manual supplied for your TV.
2
Prepare a CD.
Refer to “Loading CDs” on this page.
3
Start playback of the CD.
Press CD ►/!!, to start playback of the currently selected
CD, or press CD 1-3, to select the disc and start play.
When you play a Video CD, “VIDEO CD” appears on the
display.
When you play a Super VCD, “SVCD” appears on the
display.
I, , jii~ |-| г
// I II C LI L i\
Сотри Play
When CD ►/!!, or CD 1-3, is pressed while the system is on
standby, the power is automatically turned on.
To stop during play, press ■ .
To stop play and remove the disc, press ^ for the disc being
played.
1 6