JVC MX-J680V - Manual (Page 33)

4
Set the turn-on time.
1) Press or to set the hour, then
press SET.
2) Press or to set the minute,
then press SET.
“OFF TIME” appears for 2 seconds,
then the unit enters turn-off time setting
mode.
5
Set the turn-off time.
1) Press or to set the hour, then
press SET.
2) Press or to set the minute,
then press SET.
The unit enters preset station selecting
mode.
6
Select the preset station.
1) Press or to select the band
(“TUNER EM” or “TUNER AM”),
then press SET.
2) Press or to select a preset
channel number, then press SET.
The REC (Recording Timer) indicator
stops flashing and remains lit. The
settings you have entered are shown on the display in
sequence.
7 ':9TANOBY::::r
Press 0/1 to turn off the unit (on “
standby) if necessary.
If you want to listen to another source while recording
Press REC START/STOP to stop recording. Without stopping it, you
cannot change the source.
To turn on or off Recording Timer after it is set
1 Press CLOCK/TIMER repeatedly until
“REC” appears on the display.
To turn off the Recording Timer, press
CANCEL.
The REC (Recording Timer) indicator goes off
from the display.
The Recording Timer is canceled, but the setting
for the Recording Timer remains in memory.
To turn on the Recording Timer, press SET.
The REC (Recording Timer) indicator lights up
on the display. The settings you have entered are
shown on the display in sequence for your
confirmation.
Using Sleep Timer
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer works
The unit automatically turns off after the specified time
length elapses.
On the remote control ONLY;
1
Press SLEEP.
The time length until shut-off appears and the
SLEEP indicator starts flashing on the display.
• Each time you press the button, the time length
changes as follows:
I—10—20-—30-*^60—90—120-]
'------------------- Canceled ---------------------- '
2
Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until shut-off, press SLEEP
once so that the remaining time until shut-off appears for
about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are examples.
• Recording Timer has priority over Daily Timer and
Sleep Timer.
If Daily Timer is set to eome on while Recording Timer is
operating. Daily Timer will not come on at all.
Recording Timer
Daily Timer
I I
does not work.
If Recording Timer is set to come on while Sleep Timer is
operating. Sleep Timer will not work (the SLEEP indicator
does not go off).
Recording Timer
Sleep Timer
7:00 7:30
I
I I
does not work.
- 2 8 -