JVC MX-J680V - Manual (Page 23)

Continued
Screensaver
When a menu screen of karaoke disc is diplayed for about a few
minutes without any selection being made, it automatically starts
from a first song.
If a Video CD/Super Video CD is paused for about 10 minutes, the
screen background automatically fades out to prevent screen bum
in while the setting is suspended.
Playing Video CDs/SVCDs without PBC -
Continous Play_________________________
Even if a video CD has PBC, you can cancel PBC and play the
disc without using menu screen.
7
Ibrn on the TV and select the video input so that
you can view the pictures from the CD Player.
Refer to the manual supplied for your TV.
2
Prepare a CD.
Refer to “Loading CDs” on page 16.
3
Start playback of the CD.
On the unit:
Press CD ►/!! or CD 1 -3 of the tray you want to play from.
The selected video CD starts playback from the first track.
On the remote control:
Press the number button of the track you want to start playing.
The playback starts from the selected track of the currently
selected disc.
To stop during play, press ■ cSh.
To restore PBC, press the PBC button again.
Then press current CDl, CD2 or CD3 to play
VCD with PBC.
I notes I Cancelling PBC
• After cancelling PBC, you can Continously Play more than
one video CD without PBC.
• When PBC is cancelled, some images such as still play pic­
tures may not be played back.
• You cannot change from PBC OFF to PBC ON while CD is
playing.
Reminder!
Disconnect your CD OPTICAL DIGITAL OUTPUT when
playing or recording a Video CD or SVCD.
Resuming Play_________________________
If you stop a video CD or Super Video CD (SVCD) directly,
you can continue viewing from the scene where you last stopped.
7
During ] : playing a VCD or SVCD, press I
to stop playing, (refer to page 16)
I ( 5 é button
2v
ress CD ►/!! button to continue playback from
the last scene that you stopped at.
NOTE:
1 Resume play will not work when the CD tray has been opened.
2 It is advisable to turn off PBC to use resuming play if not it
will resume at PBC menu.
Special Plays for a Video CD_______________
You can use the following special play modes for
video CDs both with and without PBC. 1 he
following functions can only be executed with the
buttons on the remote control.
Frame-by-Frame Playback
Press CD ►/II , then the STILL key
during playback.
When you press the button first, play pauses and you
see a still picture on the TV screen. Then each time
you press the button, still pictures advance by one
frame. During frame-by- frame playback, no sound
is emitted.
CD
To resume normal playback, press CD ►/!!.
Viewing Operating Status
Usually, the following information of the track being played is
shown on the TV screen during playback: the disc number, the
track number, and the playing time.
Press ON SCREEN.
This button toggles the display of operation status.
ONSCREEN
When the display of operation status turns on, the (r>.
following information of the track being played appear ^
on the TV screen briefly: MPX mode and key control. '
The TV screen will show the following:
To cancel the display of operation status, press ON SCREEN
“DISP. OFF” appears on the TV sceen briefly and all the
information about the track being played disappears.
Viewing the Video Intro of the Video CD
You can view the contents of a video CD , watching first 5
seconds of each track on the video CD. Video intro does not
work with PBC. For a video CD with PBC, cancel the PBC
function referring to “Playing CDs/SVCDs without PBC”
above.
7
Press CD 1-3, to select the disc you want
to view the video intro of.
Playback starts. /coY
^Pi ress V.INTRO on the remote after a
picture appears on the TV screen.
The video intro play starts and shows in sequence, the first 5
seconds of nine tracks on the TV screen . If the CD consists
of more than 9 tracks, tracks above 9 will be shown after the
first 9 tracks.
- 1 8 -