Toshiba MA-290-100 SERIES - Manual (Page 40)

2. An amount must be entered before each media key.
3. Neither [ITEM CORR] nor [VOID] can void any items in a pick-up
operation.
4. On the depression of the [PO] key, the drawer opens. Pick-ups
may be carried out with the drawer kept open, even if the
’’Drawer-close Compulsory" option is selected.
VALIDATION PRINT
After entering the
required item through
a transaction key or
media key.
Insert a validation
slip into the vali­
dation slot. Make
sure that the "SLP"
lamp is steadily lit.
VALIDATE'
Validation
Slot
Validation
Slip
NOTES: 1. No other operations can follow
until the validation slip once
printed is withdrawn,
2. If the "SLP" lamp flickers during
registrations, it indicates that
the last item just registered has
been programmed to require
validation print. In this case,
no other operations can follow
until a validation print is
executed,
3, The following are the selections
programmable relating to
validation:
(1) PRINT FORMAT:
a) Date Print/Non-print
b) Consecutive No. Print/Non-
print
(2) MULTI- or SINGLE-VALIDATION
(Number of times of validation
print allowed for the same
item.)
(3) VALIDATION COMPULSORY status
on the following keys:
[AT/TL], [CHECK], [Chg],
[MISC], [CPN], [FSTL TEND],
[RTN MDSE], [PO], [R/A],
[ITEM CORR], [VOID], New
Balance in Charge Posting,
[DOLL DISC], [%-], Negative
Departments/PLUs, [BTL RTN],
[VND CPN], [STR CPN].
RECEIPT POST-ISSUE (Allowed only outside a sale.)
[RECEIPT issue ; A receipt with the total amount of the last-finalized
sale is issued. A programmable option provides a
selection not to issue the post-receipt if the last
sale has been finalized with the [RECEIPT ON/OFF]
switch positioned to ’ON’.
36