Toshiba MA-290-100 SERIES - Manual (Page 29)

processed into the TAX 4 memory. Therefore, the tax amount
automatically calculated and printed at finalizing the sale (TAX 1 to
TAX 3) does not include a manual-entered tax, while the entire sale
total printed on the receipt last line includes the manual-tax also.
This key is also used, if depressed without an amount entry within a
sale, to display the total of only non-taxable items so far entered.
Usually, this non-taxable total is only displayed but not printed.
However, it may be programmed to print also.
RPT
REPEAT KEY [RPTj
This key is used to repeat a department or PLU entry. This key
enables repeat entries not only for normal department or PLU items but
also items modified with [PR OPEN], [SHIFT], etc.
SCALE
SCALE KEY [SCALE]
This key is used for various scaled items. To enable to register
weight data from the scale into a Department or PLU, the Department
must be programmed to "Allow Scale Entry" or the PLU must be
programmed to be of Scale Type.
To operate, place the item on the scale platter, depress [SCALE],
followed by a normal Department or PLU sequence. (The [SCALE] key may
be omitted when a PLU sequence follows.)
Refer to the "REGISTERING PROCEDURE FOR SALES" section for vaious
scale operations.
TARE
TARE KEY [TARE]
This key is used to enter the tare weight data prior to a scaled item
entry, thus to subtract the tare from the gross weight and obtain the
net weight.
When the required tare weight is programmed as Tare Table No. (1 to
9), enter the Tare Table No., and then depress [TARE]. If the tare is
not a programmed weight, depress [PR OPEN] first, enter the tare
weight, and then depress [TARE].
Refer to the "REGISTERING PROCEDURE FOR SALES'
in combination of scaled item entries.
section for details
RECEIPT
ISSUE
RECEIPT POST-ISSUE KEY [RECEIPT ISSUE]
This key is used to issue the receipt of a sale when the sale has
already been fianalized with the [RECEIPT ON/OFF] switch positioned to
OFF. However, the post-receipt can be issued even when the
[RECEIPT ON/OFF] switch is positioned to ON if so programmed in the
system option.
To operate, depress the [RECEIPT ISSUE] key without a numeric entry.
The receipt for the last sale (printed with the sale total but not
detail items) is issued. This key will not function if another sale
has already been under way.
- 25 -