Charge total key [chg – Toshiba MA-290-100 SERIES User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If the "Total Validation" option is selected, validation after a
(TXBL TL] key depression will print the sale total (including taxes)
and thereafter only sale finalizing operation will be allowed.
The [AT/TL] key is also used to finalize received-on-account payments
or paid-out amounts.
The [AT/TL] key can be programmed with the HALC (High Amount Listing
Capacity) of the amount tendered. If it is set, the amount tendered
must not exceed the programmed value; otherwise, it will result in an
error. If the [LC OPEN] key is used prior to the [AT/TL] key
depression, the HALC will be extended by one additional digit. If an
amount still larger must be entered, the Mode Lock must be turned to
the "MGR" position.
The [AT/TL] key can also be programmed to prohibit short-tendering
operation.
CHECK
TEND
CHECK TENDER KEY [CHECK]
This key is one of non-cash media keys, and used to cash a check when
Che register is outside a sale, or to finalize the transaction as a
check payment.
Chg
CHECK CASHING
When the register is outside a sale, enter the check amount and
depress the [CHECK] key. A receipt is issued and the drawer is
opened to enable exchange. However, this cashing function may be
prohibited if so programmed.
FINALIZING AS CHECK PAYMENT
On finalizing a sale, refer to the [AT/TL] key description. The
[CHECK] key is ususally programmed to function as "Tender" key only.
However, it may be programmed to function as "Total" key only or as
both "Tender" and "Total" keys, just as [AT/TL].
The [CHECK] key is also used to finalize received-on-account payments
when paid in check. However, this function may be programmed to be
prohibited.
Over-tendering and/or short-tendering using this key may be also
programmed to be prohibited (in case this key functions as "Tender"
key).
CHARGE TOTAL KEY [Chg]
This key is usually programmed as "Charge Sale Total" Key. However,
it may be programmed to be the key for other non-cash media such as
payments in credit cards. Thus this key is used as an alternative
method of payments for media other than cash and check. To operate,
depress the [Chg] key, instead of [AT/TL], to obtain the total and
finalize the sale.
This key has exactly the same functions and programmabilities as the
[CHECK] key except that the [Chg] key is usually programmed as a
"Total" key but not a "Tender" key.
- 20 -