Listing capacity open key [lc open, Pld (price-look-up) key [plu – Toshiba MA-290-100 SERIES User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PR
OPEN
PRESET OPEN KEY [PR OPEN]
This key is used to modify Che status of preset department keys. When
the [PR OPEN] key is depressed prior to depressing a preset department
key (either before or after the numeric entry), the preset department
key is reversed to an open department key and allows amount entry
through the numeric keyboard for that item only.
If a preset department is entered with a price through the numeric
keyboard using the [PR OPEN] key, repeating the same department key
will not repeat the first manually-entered amount but the original
preset price will be entered instead. The [RPT] (Repeat) key makes it
possible to repeat even the manually-entered price of a preset
department key,
The [PR OPEN] key can not be used for a PLU item entry.
LC
OPEN
LISTING CAPACITY OPEN KEY [LC OPEN]
This key is used to release the listing capacity on each Department or
media key. To operate, depress the [LC OPEN] key before depressing the
department key or media key (either before or after the price or
amount entry).
By depressing the [LC OPEN] key, the HALC (High Amount Lisiting
Capacity) will be released to allow a numeric entry with two further
digits, and the LALC (Low Amount Listing Capacity) will be one digit
less than the programmed value, as to the department keys. As for the
media keys, the HALC will be extended to allow one further digits.
The [LC OPEN] key will not function to release the amount limit
setting
on
each
of
the
[DOLL
DISC],
[VND
CPN],
and
[BTL RTN](motorized-inside-sale type).
In order to allow an amount entry beyond the values defined with the
use of the [LC OPEN] key, the Mode Lock must be turned to the "MGR”
position of the Mode Lock, which position also allows a free amount
entry through [DOLL DISC], [VND CPN], and [BTL RTN).
PLU
PLD (Price-Look-Up) KEY [PLU]
This key is used to enter a PLU that is linked to a department. Each
PLU can be programmed to be a preset PLU (to allow the preset price
only) or an open PLU (to allow a price entry through the numeric keys
each time).
TO ENTER THROUGH PRESET PLU:
I
p
LU Code
I
-► [PLU]
number of
1 to 4 digits
(1 to 9999)
The preset price will automatically be
read and entered.
To repeat the same PLU price, depress the
[PLU] key only, after the above operation.
10 -