Kenwood TH-42A - Manual (Page 51)

PAGE CODE AND REPEATERS LOCKING-OUT CODES
Pressing [PTT] transmits the Page code after a short
delay. This delay helps avoid losing Page data when
using repeaters with long response times that may miss
receiving a portion of the Page code.
The delay time is 350 ms during simplex operation.
When using transmit offset or split operation, you can
change 350 ms (default) to 550 ms.
1 Press [CALL] + POWER ON to enter Menu Set-up.
2 Turn the ENC/SQL control to select Menu No. 08.
• The current delay time is displayed.
J, no
d b J J U
3 Press [CALL] to select ''350" or "550".
4 Press any key other than [CALL], [LAMP], or [MONi]
to exit Menu Set-up.
The following explains how to inhibit the transceiver from
receiving specific Page codes. Although the codes are
locked-out from the receiver, the transmitter still
transmits a Page on the locked out channels.
1 Press [F], [1].
• "PAG" appears.
2 Press [F] (1 s), [1] to select Code Select.
3 Turn the ENC/SQL control to display the Page code
to be locked-out.
4 Press [F] (1 s), [LAMP],
• A icon on the display indicates the Page code
is locked-out.
APO
b P I I I
• Each time this key combination is pressed, the
selected Page code is locked-out and unlocked
alternately.
Note: You cannot lock-out memory 0 that stores the calling
station’s code.
46