2 press [f], [t/ct – Kenwood TH-42A User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SELECTING FREQUENCY STEP SIZE
Choosing the correct step size when operating is
essential in order to select your exact operating
frequency with the ENC/SQL control. The best step size
is the largest step that will still allow you to use the
ENC/SQL control to select all frequencies on which you
plan to operate. Using the best step size reduces the
time required to select new frequencies with the
ENC/SQL control; operating becomes easier.
Version
Default (kHz)
TH-22
TH-42
Canada
U.S.A.
5
25
Australia
Europe V-
General
12.5
25
P b .
3 Turn the ENC/SQL control to switch between
available frequency steps.
• As you turn the ENC/SQL control clockwise or
counterclockwise, the following selections appear:
5 kHz
-<—>-
10kHz
15 kHz
25 kHz
12.5 kHz
e*- 20 kHz
4 Press any key other than [LAMP] or [MONI].
• The new step size is stored, and the previous
display is restored.
Note: The step size can be set separately for the VFO, Call
channel, and memory channels.
1 Press [VFO] to select the VFO.
2 Press [F], [T/CT].
• The current frequency step appears.
14