Kenwood TH-42A User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

® + - E]

Displays the transmit offset direction in relation to the
receive frequency.

L .

Displays the operating frequency, frequency step, Tone

frequency, and current menu settings.

Displays the current memory channel selected when

using Memory Recall.

Appears when Tone Alert is ON. Flashes when a signal
is received.

® S

Appears when Battery Saver is ON.

Appears when the selected memory channel contains
data while using Memory Store.

Appears when the selected channel or Page code is

locked-out. While memory scanning, the transceiver

does not stop on locked-out channels. During Page
operation, the squelch does not open for locked-out
codes.

While receiving, displays the relative signal strength of

received signals. While transmitting, displays the relative
battery level.

—

Blinks to indicate the 1 MHz step function is ON.

cam

Appears when the squelch is open due to a received
signal (or noise) that is greater in strength than the
squelch threshold level.

® SB

Appears when the transmit output power is set to Low

("L") or Economic Low ("EL"). Neither indicator appears

when High power is selected.

® APO
Appears when Automatic Power Off is ON.

Appears when [F] is pressed. Indicates that the

alternate function of dual function keys can be used now.

This manual is related to the following products: