Kenwood TH-42A User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2 Enter the desired DTMF digits using the keypad (15
digits maxinrium).
• If incorrect data is entered, press [VFO] and
enter the correct data from the beginning.
• To abort data entry, press [CALL]. The previous
mode is restored.
3 Press [MR], [1] to [5].
• Only press a single number corresponding to the
desired DTMF memory channel.
• The previous mode is restored.
Confirming Stored DTMF Numbers
1 Press [F], [3].
• The following display appears:
p .
Enter the DTMF memory channel (1 to 5) that
contains the DTMF number.
• The stored DTMF digits are displayed.
• Selecting a DTMF memory channel that has no
DTMF number stored causes the previous
display to be restored.
33