Kenwood TH-42A - Manual (Page 40)

Transmitting Stored DTMF Numbers
To transmit a stored DTMF number, use the following
procedure:
1 Press [PTT] + [CALL] and continue holding [PTT]
down.
* The following display appears:
Activating DTMF Transmit Hold
It's easier to enter a long string of digits if you don’t
have to hold down [PTT] while entering the digits.
Your transceiver remains in the transmit state for 2
seconds after pressing each key when this function is
activated.
1 Press [CALL] + POWER ON to enter Menu
Set-up.
2 Turn the ENC/SQL control to select Menu No. 09.
• The current Transmit Hold status appears.
• The default is ''OFF”.
2 Enter the DTMF memory channel (1 to 5) that
contains the DTMF number to be transmitted.
• The stored DTMF digits are displayed as they
are transmitted.
• Transmission continues until all digits are sent.
Releasing [PTT] will not interrupt the digits being
sent or stop transmission.
• Selecting a DTMF memory channel that has no
DTMF number stored causes the previous
display to be restored.
03
3 Press [CALL] to select "OFF" or "ON".
♦ OFF: Disables Transmit Hold.
• ON : Enables Transmit Hold.
4 Press any key other than [CALL], [LAMP], or
[MONI] to exit Menu Set-up.
34