4 press [ptt] +[mr – Kenwood TH-42A User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 Press [MR].
• The selected frequency and associated data are
stored in the memory channel.
• If the memory channel selected in the previous
step already contained data, the new data
overwrites the previous data.
• The previous mode is restored.
The
" A "
symbol under the channel number indicates
the following:
• Symbol ON : Channel contains data.
• Symbol blinking ; Channel empty.
APO
I n ^
22
Split Memory Channels
1 After storing the receive frequency using "Simplex
memory channels" instructions in the preceding
section, select the desired transmit frequency.
2 Press [F] (1 s) to select Memory Storage.
3 Turn the ENC/SQL control to select the memory
channel containing the receive frequency.
4 Press [PTT] +[MR].
• The selected transmit frequency is stored in the
memory channel, and the previous mode is
restored.
• if the memory channel selected does not contain
a receive frequency, your transceiver beeps and
restores the previous mode.
• Associated data such as Tone status/frequency,
frequency step, and DTSS status/code are not
overwritten. However, transmit shift status and
Reverse status data are erased.