Installation instructions, 2. accessories, 1. installation – Kenwood TM-431E User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2-2. ACCESSORIES
Unpack your new transceiver carefully and examine it for
visible damage. If the equipment has been damaged in ship
ment, notify the transportation company immediately. Save
the boxes and packing material for future shipping.
The following accessories should have been included in the
box with the transceiver.
MC-44DM DTMF Microphone
(U.S.A. only)......................................... T91-0380-X5........... 1 ea.
or
Dynamic Microphone..............................T91-0379-X5........... 1 ea.
or
Dynamic Microphone (European version)..T91-0382-X5..... 1 ea.
Microphone Hook (U.S.A. only)............. J20-0319-24............ 1 ea.
Self Tapping Screw (U.S.A. only)........ N46-3010-46...........2 ea.
Mobile Mounting Kit (1 ea.)
Bracket................................................. J29-0436-03............ 1 ea.
Mounting screws................................. N99-0331-05........... 1 ea.
SEMS Screw...................................... 4 ea.
Self Tapping Screw........................... 4 ea.
Flat Washer........................................4 ea.
Wrench................................................. W01-0414-04...........1 ea.
Stacking Plate
(TM-331A/431A/431E/531A/531E)..J21-4147-14...............2 ea.
DC Power Cable...................................... E30-2111-05............1 ea.
Fuse........................................................................................... 1 ea.
TM-231A/231E: 15 A............................ F05-1531-05
TM-431A/431E: 10 A............................ F05-1031-05
TM-331A/TM-531A/531E: 8 A.............. F05-8021-05
Instruction Manual.................................. B50-8286-XX.... 1 copy
Warranty Card (U.S.A. version, European version)............. 1 ea.
3. INSTALLATION INSTRUCTIONS
3-1. INSTALLATION
Mounting Bracket
When installing the transceiver in your vehicle consider the
ease of operation and safety when selecting the location
for the mounting bracket.
1.
Install
the
bracket
using
the
flat
washers
and
self
tap
ping
screws
that
were
supplied
with
the
transceiver.
(4
Pieces ea.)
2.
Attach
the
transceiver
loosely
using
the 4 SEMS screws
that were supplied.
3.
Align
the
grooves
in
the
bracket
with
the
transceivers
screws (Fig. A) and slide the transceiver to the rear.
4.
Adjust
the
viewing
angle
of
the
bracket
to
the
desired
position. (Fig. B)
5.
Hold
the
transceiver
in
place
and
tighten
the
4
SEMS
screws, using the wrench that was supplied.
c
C