Kenwood TM-431E - Manual (Page 21)

TM-231A TM-231E TM-331A TM-431A TM-431E TM-531A TM-531E
VFO Frequency 144.000 MHz 220.000 MHz
440.000 MHz
(U.S.A. version) 430.000 MHz 1 240.000 MHz
430.000 MHz
Frequency Step 5 kHz 12.5 kHz 20 kHz 25 kHz
Memory Channel Memory channel 1
Memory Channel 144.000 MHz 220.000 MHz
440.000 MHz
(U.S.A. version) 430.000 MHz 1240.000 MHz
430.000 MHz
Tone Frequency 88.5 Hz
Microprocessor Initialization
When you want to erase all programmed data, or if the dis­
play should show erroneous information you should initial­
ize (reset) the microprocessor using the following procedure.
1. Turn the POWER switch OFF.
2. Press and hold the MR key.
3. Turn on the POWER switch.
4. Release the MR key.
4-4-3. Special Memory Channels
This transceiver provides 20 Memory Channels. In addition
to serving as normal memory channels some of the chan­
nels serve a dual purpose and specify other parameters. The
functions of these memory channels is described below.
* Memory Channel 1 is used to store the frequency of the
Priority Alert function.
* Memory Channel 1 5 is used to store the lower limit for
the Programmable band scan function.
* Memory Channel 16 is used to store the upper limit for
the Programmable band scan function.
* Memory Channels 1 7-20 are used to store odd split
repeater data.
21