Kenwood TM-431E User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The power requirement is 13.8 VDC.
Never attemot connection to a 24 VDC source.
Do not place the unit in areas of excessive dust, high hu
midity or on unstable surfaces.
Do not drop pieces of metal, needles, coins and other elec
trically conductive materials into the unit.
Do not touch the power plug, when your hands are wet.
Do not
pull the power cord, when disconnecting it from the
AC wall outlet. Grasp the plug and ensure that your fingers
do not touch the live pins.
If
an
abnormal
odor
or
smoke
is
detected,
immediately
turn
the
power
off
and
pull
out
the
power
plug.
Contact
the
KENWOOD service station or your dealer.
CLEANING
1. Turn the power off, before cleaning the unit.
2.
Do
not
use
any
type
of
abrasive
pad,
thinner,
benzine
or any substances which may damage the unit.
3.
Wipe
the
front panel
and
other
exterior
surfaces
of
the
unit with a soft dry cloth or a soft cloth lightly moistened
with water.