Kenwood TM-431E User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7-1-2. Digital Recording Unit DRU-1
1.
Remove the 2 screws securing the Top cover. Gently re
move the top cover. (Fig. 1)
2. Attach the three cables from the DRU-1 as shown in Fig.
2
.
3.
Gently place the DRU-1 in the transceiver as shown in
Fig. 3. Don't forget to attach the TSU-6 as shown if you
are installing this unit at the same time (Fig. 4). Tighten
the screw.
4.
Replace
the
covers
and
tighten
the
screws
to
complete
the installation.
7-1-3. Remote Controller RC-10
To
operate
the
transceiver
with
the
RC-10
press
and
hold
the CALL key on the transceiver and then turn on the POW
ER switch.
To
select
the
CALL
channel
when
using
the
RC-10
press
the F key on the RC-10 and then the VFO key.
Please
refer
to
the
instructions
provided
with
the
RC-10
for
a description of the other RC-10 functions.
38