Kenwood 855 AV - Manual (Page 47)

8 Press the PLAY/CUT button on the turntable to start ,
recording. . .
When the turntable stops, the recording stops, and
the playerstops. ■ .
To stop recording
Press'the PLAY/CUT buttoeon the turntable.
If you press the ■ button on the cassette deck, the
cassette deck stops, but the turntable keeps playing.
Copying (dubbing) a tape
You can autonnatically copy a tape in tape well A onto a
tape in tape well B. You can copy at normal speed or at
high speed, which takes half the time.
jjust recording level and balance ^
r. They are set automatically. . f
[g ID tape well B will automate
yedppttQp as the origi- ^
means you
z~3
is_recorded at very high
copying for
may cause interfe.r-
copying. If this happens,
1 Insert the tape to copy into welJ A, and a blank tape
into well B, - . -
2 Make sure that both wells are set in the same direc­
tion, and immediately press the STOP button.
3 Select.the copying (dubbing) mode: ’
^ ) copies both sides of the tape,
^ ____ copies one side of the tape ,
47.