Kenwood 855 AV - Manual (Page 42)

Recording from a CD (with automatic recording-level set)
You can automatically set the best recording level for
recording from a CD using the system's Computer-
Controlled Recording System (CCRS).
1 Using the CD player's DISC SELECTOR buttons,
selecta CD.
2 Insert a blank tape in tape well B.
3 Select the Dolby Noise Reduction mode.
4 Press the CCRS button. The CCRS.light flashes. .
Several different parts of the CD. are sampled, the
CD's peak level is determined, and the best recording
level for that CD is automatically set .
The CD“ and tape are automaticaify cued up at their
beginnings, an 8-secohd blank spaceJs recorded at
the beginning of the tape, and the CD is automatically
recorded. . ^
5 When the system is done recording, press the CD
player's OPEN/CLOSE button. Y _ .
To cancel automatic recording
Press the CD playePs STOP button, if the system has
started recording, after you press the STOP button,
press the OPEN/CLOSE button."
LsellbeJaest recording level, record'the
^Csee 'Reading a tape' on
42.