Kenwood 855 AV - Manual (Page 44)

Creating custom tapes from CDs
You can tape up to 32 tracks frotji.one :Qr more CDs',tQ^
fit a particular tape length. The player automatically edits
the order of the tracks, so no track is cut off at the end ,
of the tape.
Taping a single CD
Your CD player.automatically selects the number of
tracks (in numerical order) to best fill Side-A . The player
selects, the tracks for Side-B the.sanne way.
1 Make sure the PGM light js. OFF. If the, PGM light is
ON, press the P.MODE button. . -
2 Press the STOP button.
3 Press the EDIT MODE Button, once. The EDIT .light
turns ON.
4 Select the CD you. want .to tape using the DISC.
SELECTOR buttons. . ; . . . . . . .
5 Press the.TlME DISP. buttom and enter the recording
time of the tape. Each time you press the button, the .
time cycles from 46 .> 54.> 60 > 9Q and then b^k .
to 46. The time you selected flashes on the display.
You can adjust the time by pressing the DISC SKIP, _
buttons. Each time you press the appropriate.button,
you increase'or decrease the time by I minute,. .
6 Press the EDIT NODE button again. The EDIT light,
flashes, and the display shows the tracks selected for
Side-A and.then the tracks fpr,Side-B. Finally, the
PLAY light flashes, while the EDIT light remains' ON. .
7 To start recording, press the CCRS button on the,
cassette deck. Recording begins after about 1 minute.'
For an explanation of CCRS, see page 42.
TTY__________ 1
~ r„j] flr.:r..........
±3-
F
.1_________ N
.......X:,,,:,
.......
T i " :
C3Z1
.—
:
..........J|
j[ i '(®11 Itigii || 1 Pll.....'fi^n ]j
1..f T b-,l=,;irlFiii:l
ai___ i.... L . , ,lc=3
. c3i 1 1 la
Taping tracks from multiple CDs
You can record tracks from more than one.CD onto a . i
single tape.
' I Make sure the PGM light is OFF., If the PGM light is i
ON, press the P.MODE button.
2 Press the STOP button.. . ...
3 Press the EDIT MODE Button twice. The MULTI
EDIT light turns ON.
4 Press the TIME DJSR button,, and enter the recording
time of the tape. Each time you press the button, the
time cycles from 46 > 54 >.60 .> 90 and then back
to 46. ,The time, you selected flashes on the display.
You can adjust the time by pressing the DISC SKIP,
buttons. Each time you press_the appropKate.button,
you increase or decrease the time by I minute.
You can also enter the time by using the number
buttons on the remote. In this case, you don’t have to
press the EDIT M.O.DE button after entering the time.
44.