Sharp AQUOS LC-37GP1U - Manual (Page 54)

Appendix
Removing the stand
E-M-ii .i'b ' lol,)--|-iii lij .r .)ll.v''l liiKi; ■-■.¡and, unplug the AC cord from the AC INPUT terminal
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
* Before performing work make sure to turn off the TV.
» Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
Hex key-
Unfasten the four screws used to secure the stand in
piace. Detach the stand from fhe TV. {Hoid fhe sfand so if
will not drop from the edge of the base area.)
■ To attach the stand, perform the above steps in reverse order.
Setting the t¥ on the wrati - - -
• This TV should be mounted on the wall only with the AN-37AG2 (SHARP) wall mount bracket. The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using an optional bracket to mount the TV
« You can ask a qualified service professional about using an optional AN-37AG2 bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-37AG2 wall mount bracket.
(See the bracket instructions for details.)
About setting the TV angle
:-iiod=! Angle of TV :
LC-32GP1U 0/5/10°
LG-37GP1U 0/5/10°
Vertical mounting Angular mounting
* Detach the cabie clamps on the rear of the TV when using the optional mount bracket.
• Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the
wall and the TV for the cables.
® - 53