Sharp AQUOS LC-37GP1U - Manual (Page 26)

Basic adjustment settings
Channel memory setting
i Press MENU to display the MENU screen, and
then press - 4 /^ to select “Setup”.
Press ^/T to select “CH Setup”, and then
press
ENTER
• If you already set the Secret No., input the 4-dlgit
secret number here. See page 43 for setting a
secret number.
Press ^/T to select “CH Memory”, and then
press
ENTER
Press A/T to select ANALOG (Air), ANALOG
(Cable). DIGITAL (Air) or DIGITAL (Cable), and
then press ENTER.
g When viewing ANALOG broadcasts:
® Press to select the channel to skip,
and then press T to move down.
@ Press to select “On”, and then press
ENTER
When viewing DIGITAL broadcasts:
0 Press A-^T to select the channel to skip,
and then press to select “On”.
• On: Skips channels. (Channel selection disabled using CH
A/V.)
* Off: Does not skip channels. (Channel selection enabled
using CH
A/\/')
-'ress MENU to exit.
• Make sure what kind of connection is made with your TV.
vAntenria.'Setup; ^ c'c-cr-■ i L -Li * *
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the “Antenna Setup -
DIGITAL" screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
^ Press MENU to display the MENU screen, and
* then press to select “Setup".
Press A''T to select “Antenna Setup -
■ DIGITAL”, and then press ENTER.
Pices A-'V to S..L.CT ■■Sigi lul Strei ulii .
« lie -¡(jU,-d . I- o' : .)! '• r !'■: :-JU:iel ,
displayed. The signal information is based
current channel.
Channel Strength
The channel signal strength can also be checked
separately.
1
2
Repeat steps 1 and 2 in Signal Strength in
Antenna Setup - DIGITAL.
Press A^T to select “Channel Strength”, and
then press ENTER.
Input the 2-digit channel number to check the
signal strength of the selected channel.
* tv'‘X:
:
-.io -i.i]
is strong enough for each
Press MENU to exit.
» This function is avaiiabis for DIGiTAL (Air) only.
®- 25