Sharp AQUOS LC-37GP1U - Manual (Page 29)

Basic adjustment settings
: Advanced: .picture-.adjysimehts
Thii-S TV provides various advanced funciioi'is for
optimizing the picture quaiity.
1
Press MENU to display the MENU screen, and
then press -4/^ to select “Picture”.
fj Press A/T to select “Advanced”, and then
press ENTER
i
xj Press a /T to select a specific adjustment
‘ * item, and then press ENTER.
® You can select “Color Temp.”, “Black”, “3D-Y/C",
“Monochrome”, “Film Mode” or “Range of OPC”.
Press a /T (or to select the desired
parameter.
* See the table for the seiectable parameters.
Press MENU to exit.
For a better white balance, use color temperature
correction.
Selected item
High
Mid-High
Middle
Mid-Low
Low
De-v.-.rlpiior:
White with Bluish tone
White with Reddish tone
fB.|ackf
(dianges llie viewing !I b |;'II i l.jy .■:ii..ilomalicYtlly .adjrrstiiig
the dark portion of an image for easier viewing.
ii' iV: ipéscrlptiòrs ;
On For high detail in black portions
Off No adjustment
: : p ;:
Provides high q
and cross color uality images with minimal dot crawl
noise.
:SPl6c:i;ecl item ...................................... -fr
• ' ' :.............................. '
....................................... t .....................................................................
Standard Normal adjustment
Fast For moving images
Slow For still images
\\NOT
• 3D-Y/G is available for input signal from Composite Video
and analog broadcasts (air and cable).
IVionochiOine
For viewinci ,a videe- ili iTionociìrcrne.
Selected ìtern
On
Off
Description
For viewing in monochrome
Normal color
^F:l!m Mode (3:2:pu!l‘-down).i
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
Soli:.; jir-iF'-
On
Off
iDssoripti.on ;
Detects, analyzes, converts film source
Normal viewing mode
)Ri3;ng:e,;of(OPCi;
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
;an be set to a maximum of + f 6 and a minimum of
-16.
C".!v:v:i--r= jir-lVi
Max.
Min.
Dèseription ;
-15 through +16
-16 through +15
• The range of OPC settings are active only when the OPC is
set to On.
® The maximum setting cannot be set to a smaller number
than the minimum setting.
« The minimum setting cannot be set to a bigger number
than the maximum setting.
® Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
®- 28