Sharp AQUOS LC-37GP1U - Manual (Page 25)

Basic adjustment settings
;EZ; Setup-;
You can run EZ Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
'ir
Press MENU to display the MENU screen, and
then press to select “Setup”.
Press £/T to select “EZ Setup”, and then
press ENTER,
® If you already set the Secret No., go to step 3. If
not, skip to step 4.
Input the 4-digit secret number by using 0-9.
■ :eihijnnei Seiiiip;;
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
Press MENU to display the MENU screen, and
then press - 4 /^ to select “Setup".
^ Press 4 /T to select “CH Setup", and then
press ENTER.
• If you already set the Secret No., input the 4-digit
secret number here. See page 43 for setting a
secret number.
Press 4 /T to select “Air/Cable”, and then
press ENTER
'ess A/T to select the desired language
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air” or “Cable”.
Press - 4 /^ to select “Air” or “Cable”
Press ENTER to enter the setting.
Channel search
Channel auto search makes the "1C/ look for all
channels viewable in the set area.
When “Air” is selected in Antenna setting:
Press -4/^ to select “Start”, and then press
ENTER.
When “Cable” is selected in Antenna
setting:
Press ^/T to select “Analog & Digital Search
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select “Cancel”,
and then press ENTER.
Press MENU to exit.
Press to select “Air” or “Cable”
Press
ENTER to enter the setting.
Press MENU to exit.
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
Repeat steps 1 and 2 in Antenna setting in
■ Channel Setup.
Press 4 /T to select “CH Search”
press ENTER.
and then
■
When “Air” is selected in Antenna setting:
Press to select “Start", and then press
ENTER
When “Cable” is selected in Antenna
setting:
Press A/T to select “Analog & Digital Search
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
9 Channel search will start automatically.
To exit the Channel search screen, select “Cancel”,
and then press ENTER.
Press MENU to exit.
If no channel is found, confirm the type of connection made
with your "TV and try EZ Setup again.
If you select “Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
I .... i
If no channel is found, confirm the type of connection made
with your TV and try channel search again.
If you select “Analog Search Start” and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
®- 24