Sharp AQUOS LC-37GP1U - Manual (Page 20)

Watching TV
Simple button operations for
changing channels
You can change channels in several ways.
Method 1
Using CH A/V on the remote control unit or on the
TV.
Method 2
(T) Press FLASHBACK to switch to the previously
tuned channel,
(2) Press FLASHBACK again to switch back to the
currently tuned channel,
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press S^ENT
• When selecting a 1 -digit channel number, it Is not
necessary to press
0
before the number.
• When you enter 0-9 only, channel selection will be made If
there Is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1 ->5-vENT
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 ^2^ • (DOT) ^t^ENT
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
If you push “0" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
®- 19