Sharp AQUOS LC-37GP1U - Manual (Page 28)

Basic adjustment settings
i Pi:clyre:;ac||ustim:e;nts.;
Adjusts the picture to your preference with the
following picture settings.
- ; MENU to display the MENU screen, and
then press -4/^ to select “Picture”.
1
2
■
:4:.
i A.fy to select a specific adjustment
ileni.
- ; -4/^ to adjust the Item to the desired
iHVel.
; MENU to exit.
H
• For resetting al! Pi<;ture adjustment items to the factory
preset values, press to select “Reset”, press ENTER,
press to select "Yes”, and then press ENTER.
® Picture
Selected i'.-eri; hut tun button-.FFT-:
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Color For less color
intensity For more color
intensity
Tint Skin tones become
reddish
Skin tones become
greenish
Sharpness For less sharpness For more sharpness
.I
• Select “Advanced” and then press ENTER to set “Color
Temp.”, “Black”, “3D-Y/C”, “Monochrome”, “Film Mode” or
“Range of OPC”. See page 28.
tiOPC.-settjrig'.tttt: it i
Aidc.iTiatir:ally ridjusis lilt; l.irigliliiHSs t;i liiw s:;rt;Hii.
■ Press MENU to display the MENU screen, and
then press ^ 4 /^ to select “Picture”.
Press 4/T to select “OPC”.
Press to select “On” or “On: Display”.
Off
On
On: Display
tDescriptfan t
FI a biigiitnes;: I:x;.d UL F .■.:iiue ;;ci n;
“Backlight”.
Automatically adjusts
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
Press MENU to exit.
• When set to “On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set to “On: Display”, OPC effect displays on the
screen while the OPC adjusts the screen brightness.
®- 27