Brother FAX-175 - Manual (Page 8)

PRE-INSTALLATION INSTRUCTIONS
BEFORE REMOVING THE UNIT FROM THE PACKING CARTON
The Brother FAX-175 is designed to operate in an office environment or at home. It is rugged,
reliable and virtually maintenance-free. However, to ensure years of trouble-free performance,
please observe the following precautions:
• Do not locate the unit near heaters, air conditioners, in direct sunlight or in
extremely dusty environments.
• Install the unit on a flat level surface, such as a desk, a table, a typewriter or
computer stand.
• Do not locate the unit where water or chemicals are likely to splash on it.
• Select a vibration-free area of your office.
• Locate the unit within 3 feet from a telephone wall Jack.
• Locate the unit within 3 feet of a standard, grounded outlet.
• Avoid plugging in the unit into an outlet which is on the same line as an air
conditioner, a refrigeration unit, a copier, an electric typewriter or any other
device that draws a lot of current in a relatively short period of time.
CONTENTS OF THE PACKING CARTON
The packing carton contains:
1. The Brother FAX-175 unit
2. One roll of Brother thermal recording paper
3. Telephone handset
4. Handset curled cord
5. Telephone line cord
6. Owner's Manual
7. Walfet size function card
8. Warranty card
9. Test Sheet
10. AC power cord (permanently attached to the unit)
PROCEDURES FOR REMOVING THE UNIT FROM THE PACKING CARTON
1. Carefully open the carton (see the appropriate inscription on the carton)
2. Pull out the FAX-175 and the other devices together with the packing trays
3. Remove all packing trays and plastic from the unit
4. Take out the telephone line cord from the plastic packaging
5. Take out the telephone handset and the curled cord
6. Locate and take out the paper roll