C. standard dialing, D. using the redial function, E. speed dialing – Brother FAX-175 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C.
Standard dialing
There are two ways to dial a telephone call or a fax call:
1.
OFF-HOOK — Lift the handset, dial the number after hearing the dial tone.
2.
ON HOOK — Make sure that the unit's power is ON. Press the HOOK button and you
can dial with the handset in its cradle after hearing the dial tone from the speaker. The
speaker is located under the handset.
D.
Using the redial function
Redialing can be performed only immediately following a dialing (i.e., after you've dialed using
OFF-HOOK, ON-HOOK or Speed Dialing). The redial memory accepts up to 31 digits in TONE
mode or 32 digits in PULSE mode. If the number you've dialed has more than these numbers of
digits, redial will not work.
If you wish to keep the number you are dialing confidential and do not wish anyone to call it
after you leave the office or your desk unattended, simply press the redial buttom twice after
completion of dialing. The redial function will not function.
19
E.
Speed Dialing
The FAX-175 allows you to program and use up to twenty (20) pre-recorded numbers of 16
digits (in pulse mode) or 15 digits (in the tone mode) each. If you need more digits, say for
credit card calls or international calls, you can program and use more than one location for this
longer number because the FAX-175 allows "chain dialing" (i.e., pressing several speed-dial
codes in sequence).
To program your most frequently-used telephone and fax numbers follow this procedure:
1.
With the handset ON HOOK (in the cradle), press the SPEED DIAL button.
2.
Dial the desired telephone or fax number (up to 15 digits in TONE MODE, up to 16
digits in PULSE mode).
3.
Press the SPEED DIAL button again.
4.
Assign this number a two-digit code, starting with 00 and going up to 19 (this covers
the entire 20 allowable numbers). Dial in this 2-digit code.
5.
You can stop now or continue inputting the remainder of your frequently-used numbers
by returning to Step 1.
To use the speed-dialing feature of this unit, follow this procedure:
1.
Lift the handset or press the HOOK button.
2.
Press the SPEED DIAL button after hearing the dial tone.
3.
Dial the 2-digit code for the desired number.
To erase a programmed speed-dial number, follow this procedure:
1.
Press the SPEED DIAL button twice.
2.
Press the 2-digit code for the number you wish to erase from thememory.