Brother FAX-175 - Manual (Page 36)

RECEIVING
30
S Y M P T O M POSSIBLE CAUSE A C T I O N
Received copies are blank 1. The paper roll is In
backwards.
2. Wrong type of paper.
1. Reload the paper roll correctly.
2. Replace with proper thermal
recording paperpaper.
The telephone rings
continuously
1. Auto answer is turned off.
2. No power.
3. No recording paper roll
1. Turn auto answer switch ON.
It is located on the front of the
unit.
2. Check outlet voltage.
3. Load the new paper roll.
Recording paper is jammed Paper is jammed in receiving
section.
1. Turn the power off.
"CAUTION:BOTH ICM AND OGM
MESSAGES WILL BE ERASED IN
THE EVENT OF A POWER
INTERRUPTION. CARE SHOULD BE
EXERCISED WHEN UNPLUGGING
THE UNIT OR TURNING OFF THE
UNIT'S MAIN POWER SWITCH."
2. Press the recording paper cover
button to open the cover.
3. Remove the paper roll and tear off
the jammed paper.
4. Reload the paper roll.
5. Close the cover making sure you
hear it click into place.
6. Tear off excess paper.
Error indicator is lit Communications error has
occured - this us usually caused
by a bad phone line.
1. Ask the transmitting unit to
re-send the document.
2. Make sure the other unit is a Group
3 compatible machine.
3. Make sure your unit is properly
connected to the phone line.
4. Make sure the other unit is working
properly.