Closing the top cover, Power switch – Brother EM-430 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up the Typewriter
Closing the top cover
After inserting the cassette daisywheel, cassette ribbon or spool of correction tape, close
the top cover by replacing it to its original position.
Ensure that it is firnniy in place after closing.
Note:
If the top cover is closed with the unit switched ON, the carrier will autonnatically travel
to the left edge, then return to its previous position.
Power Switch
Your typewriter is now ready to be powered up. You’ll find the power cord at the back
of the typewriter. Sinnply unwrap it and plug it in.
The Power Switch is located at the left rear side ofthe typewriter under the platen knob.