Brother EM-430 - Manual (Page 27)

Basic Typing Functions
Tab clear
RMAR
TCLR
To clear a normal or decimal tab, move the carrier to the position of that tab using the
[TAB] key, hold down the [CODE] key and press the [T CLR] key.
All tab clear RMAR
TCLR
REPEAT
EXPAND
Pressing the [REPEAT] key after pressing the [CODE] + [T CLR] keys will clear all normal
and decimal tabs, regardless of the position of the carrier.
Notes:
1. If you have selected paragraph indent mode (as described later) and subsequently
clear the paragraph indent tab, the tab will be cleared but the typewriter will remain
in paragraph indent mode until it is cancelled by holding down [CODE] and pressing
[IND CLR].
2. If you move to a decinnal tab and clear that tab before typing anything, the tab will be
cleared, but anytext or numbers subsequently typed will still be printed at the decimal
tab position, unless you move to another tab position or press [RETURN].
SHIFT LOCK
CAPS
Using Shift and Caps Keys
Your typewriter normally prints lower case letters and numerals, plus the punctuation
marks and symbols shown on the lower part of other keys. However, you will often want
to type upper case letters (for beginning a sentence, etc.) and the symbols shown on the
upper part of other keys.
The [SHIFT] and [CAPS LOCK] keys allow you to do this.
Shift
If you hold down either of the [SHIFT] keys, the SHIFT LED will light, and you may type
upper case letters and the upper characters shown on other keys. Releasing this key
automatically returns the keyboard to the lower case mode.
Congratulations on becoming the proud owner of a
Brother Typewriter