Paper support – Brother EM-430 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This section tells you how to set up your typewriter to be ready for
typing. If you didn’t remove the yellow packing pieces and ft the
paper support when you unpacked the typewriter, now is the time
to do it before you attempt to power up the machine.
Paper Support
The paper support is used to check and adjust the position of the paper.
Attach the paper support by inserting the tabs into the holes provided on the top of the ■
typewriter.
The sliding paper guide can be used to adjust the position of the left edge of the paper,
relative to the extrenne left position of the print carrier, which is indicated by the ‘0’ nnark
on the embossed scale.
Note:
Should you need to move yourtypewriter, we suggest that you remove the paper support
first to avoid the risk of damage.