Inserting the new cassette daisy wheel, Cassette ribbon, Inserting the new daisy wheel – Brother EM-430 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up the Typewriter
Note:
The cassette ribbon need not be removed in orderto remove the cassette daisy wheel.
Inserting the new cassette daisy wheel
Grasping the ear of the new cassette daisy wheel, slip it into the cassette guide slot and
slide it in as far as it will go.
Now press the motor lock lever back toward the platen until it clicks into place. Do not
force the lever. If you have any difficulty, recheck the cassette daisy wheel to ensure that
it is properly set and try again.
Notes:
1. Be sure that the ‘ear ofthe cassette daisywheel istothe right during insertion. Putting
it in backwards can damage both the cassette daisywheel and the motor mechanism.
2.
If the cassette daisy wheel is not properly locked into position, characters will not be
properly typed.
3. There is a wide selection of Brother cassette daisy wheels available.
Cassette Ribbon
The wide range of Brother cassette ribbons available have two unique features in
common: they are clean and trouble free. Clean means that the ink goes where it is
supposed to go, on the paper, and not on your hands!