Subscript and superscript – Brother EM-430 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Typing
If you want to correct another character, you must move to that character and use
[CODE] + [CORRECT] again.
Afterfinishing your corrections, use the [INDEX], [R INDEX], [SPACEBAR] and [BKSP]
keys to return to your original typing position.
Notes:
1.
If the [SPACEBAR] is pressed after the [CORRECT] key has been pressed, the
correction function is cleared and the carrier will move to the right one space.
2.
You cannot use the [RELOC] key to return to your original typing position after
making manual corrections.
Subscript and Superscript
As well as moving the paper up and down, the [INDEX] and[R INDEX] keys can be used
to place your typewriter in the subscript and superscript modes. The platen will rotate
slightly up or down to allow typing of super and subscript characters 1 /12 of an inch higher
or lower than the base line (see micro indexing below).
To putyourtypewriter in the superscript mode, press the [R INDEX] key. Any characters
you subsequently type will be printed as superscript, until you press the [INDEX] key to
miove the paper back to the original typing line.
Subscript mode is the reverse of superscript. Press the [INDEX] key to enter subscript
typing and the [R INDEX] key to return to the original typing line.
type
2
^ or H
2
O
Notes:
1. Superscript and subscript characters will be typed with an underline, if your typewriter
is in the automatic underline mode, and in bold if bold mode is selected.
2.
If you press the [INDEX] or [R INDEX] key more than once, the line correction
memory will be cleared.
3.
If you hold down the [INDEX] or [R INDEX] key, the paper will advance or reverse
continuously.