Dead keys, Code key, Extra characters – Brother EM-430 User Manual
Page 22: Setting line space, Setting impact
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Typing Functions
Notes:
Be sure that the proper daisy wheel is used for the keyboard selected. For instance,
when using II, an international cassette daisy wheel should be inserted, and the symbol
cassette daisy wheel for III.
Dead Keys
The dead keys are used for diacritical marks (e.g. accents) that may be placed overtyped
characters. The carrier does not move when a dead key is typed, so the character beneath
the accent can be typed afterwards without having to backspace. When typed in the
underline mode, the typed mark will not be underlined.
CODE Key
The
[CODE]
key is used to access any function labelled in green. In addition, while the
[CODE]
key is held down, the legends printed in green above the indicator LEDs are valid.
Extra characters
The extra characters printed in green on the bottom half of some of the keys are typed
by holding down the
[CODE]
key and pressing those keys.
Setting Line Space
Yourtypewriteroffersyouthree choices of line spacing: single line spacing, one and a half
line spacing, and double line spacing. Select the desired line spacing by pressingthe
[LINE]
key. Each time the
[LINE]
key is pressed, line spacing will change to the next setting in the
order I - I 1 / 2 - 2 and the LED for the selected line space will light.