Automatic paper insertion, Auto paper insert, Paper release lever – Brother EM-430 User Manual
Page 15: Pins
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Having set up your typewriter, you are now ready to insert a sheet
of paper and begin typing.
Automatic Paper Insertion
PINS
SSET
Inserting a sheet of paper into a typewriter has never been simpler, just three easy steps
and you’re.off! Most types of smooth finish paper can be used with your typewriter. Rag
content and other types of rough paper, however, are not recommended.
First, ensure that the power switch is
ON,
and that the
PAPER RELEASE LEVER
is set to
the back position.
Place the paper guide in the desired position, then, holding the sheet as straight as possible,
insert the paper into the slot behind the paper rest with the left edge against the paper
guide.
Now press the
[PINS]
key. The carrierwill first move to the left end of the platen and then
back to the center of the nnargin scale, the paper bail will lift, and the platen will rotate to
feed in the sheet of paper automatically.