Pioneer PDP-503HDE - Manual (Page 55)

Useful adjustment settings
MENU
ENTER
A/V
Wide screen signalling (WSS) (AV
mode only)
WSS allows a television to switch automatically among
the different screen formats.
1 Press MENU.
2 Press A/T to select “Option”, and then press
ENTER
3 Press A/V to select “WSS”, and then press
ENTER.
4 Press A/T to select “Off” or “On”, and then press
ENTER.
5 Press MENU to exit the menu.
I NOTE >
• Return to the previous menu by pressing (f^.
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled. See page 51.
MENU
^
Option
.. "mr
4:3 Mode [4:3]
L 4:3
WIDE
WSS signal 4:3 screen
4:3 mode “4:3” 4:3 mode “WIDE”
Picture aspect ratio (AV mode only)
Allows you to select the aspect ratio of a video signal
for standard 4:3 or full screen images.
1 Press MENU.
2 Press A/T to select “Option”, and then press
ENTER.
3 Press A/T to select “4:3 Mode”, and then press
ENTER
4 Press A/T to select “4:3” or “WIDE”, and then
press ENTER.
5 Press MENU to exit the menu.
NOTE > * •
• Return to the previous menu by pressing o^-
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled. See page 51.
Selected item Description
4:3
Normal range keeping 4:3 or 16:9 aspect
ratio
WIDE Wide image without sidebars
-52