Pioneer PDP-503HDE - Manual (Page 32)

Basic adjustment settings
ENTER
■ A / T H / ^
Decoder menu
Programme Setup “Manua
01 SAT.1
02 PR07
03 KABEL
Off
INPUT1
INPUT2
INPUTS
Setting the decoder
When connecting a decoder to, you need assign the
terminal input.
On Programme Setup “Manual” menu
1
Press to select the channel you want to
edit, and then press ENTER.
• The selected channel Information displays.
2
Press A/T to select “Decoder”, and then press
ENTER.
• Terminal inputs are displays.
3
Press A/T to select an INPUT terminal, and then
press ENTER.
I NOTE >
• “Off” is factory preset value. When set to “Off, you cannot
watch any Image from decoders.
• Return to the previous menu by pressing o*^-
• Exit the menu by pressing MENU.
Lock menu
Programme Setup “Manual”
I
Lock 1
01 SAT.1 -1 Off 1
02 PR07 On
03 KABEL
L
Setting the child lock
You can block the viewing of any channel.
On Programme Setup “Manual” menu
1
Press A/T/^/^ to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press A/V to select “Lock”, and then press
ENTER
• Child lock menu displays.
3
Press A/V to set “Lock” to “On”, and then press
ENTER
NOTE >
• Even if set to “On”, this function never works if not setting
password. See page 54 for the details on password
setting.
• Return to the previous menu by pressing
• Exit the menu by pressing MENU.
( ID-29