Pioneer PDP-503HDE - Manual (Page 30)

Basic adjustment settings
Programme Setup “Manual” menu
Programme Setup “Manual”
10 20 30
01 SAT.1 11 21 31
02 PR07 12 22 32
03 KABEL 13 23 33
04 14 24 34
05 15 25 35
06 16 26 36
07 17 27 37
08 18 28 38
09 19 29 39
Please select channel to be edited.
42
43
44
45
46
47
48
49
[NEXT]
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
179.75MHz
AUTO
B/G
SAT.1
Off
Off
Off
Additional channels entry
On Programme Setup “Manual” menu
1
Press to select a channel number with
blue, and then press ENTER.
• Listed channels are black for “Skip” set to “Off” or blue
for “Skip” set to “On” or no channel.
• The selected channel information displays.
2
Press A/T to select “Skip”, and then press ENTER.
• Skip menu displays.
3
Press A/T to set “Skip” to “Off”, and then press
ENTER.
• Channels set “Skip” to “On” are skipped even if you
select them by using P + /P -.
I NOTE >
• Return to the previous menu by pressing o^-
• Exit the menu by pressing MENU.
Fine tuning menu
Programme Setup “Manual”
I
Fine 1
01 SAT.1 196.25 1 MHz
02 PR07
03 KABEL
Programme Setup “Manua
01 SAT.1
02 PR07
03 KABEL
0ii.|]i]MHz
Fine tuning
On Programme Setup “Manual” menu
1 Press Al'WlAl^ to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2 Press A/V to select “Fine”, and then press ENTER.
• Fine tuning bar displays.
3 Press to adjust the frequency, and then press
ENTER
• Adjust with checking the back image as a reference.
• Instead of the above, you can also set by directly
entering the frequency number of the channel with 0
-
9.
I EXAMPLE * •
• 1 79.75 MHz: Press 1^ 7 ^ 9 -
• 49.25 MHz: Press 4—9^2^
- 5 — ENTER.
ENTER
I NOTE >
• Return to the previous menu by pressing o^-
• Exit the menu by pressing MENU.
Colour system menu
Programme Setup ‘‘Manual” I
01 SAT.1
02 PR07
Colour sys.
AUTO
PAL
PAL-60
SECAM
NTSC 4.43
Colour system
On Programme Setup “Manual” menu
1
Press A/T/^/^ to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press A/T to select “Colour sys.”, and then press
ENTER.
• Receivable colour systems are listed.
3
Press A/T to select your colour system, and then
press ENTER.
I NOTE >
• Return to the previous menu by pressing
• Exit the menu by pressing MENU.
)-27