Media receiver, Front view, Rear view – Pioneer PDP-503HDE User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Part names
Media Receiver
Front view
INPUT 4 terminal (VIDEO)
If you’re having problems operating the Media Receiver and want to return to normal screen, even when it
stays on (the indicator lights green), press
CLEAR
on the Media Receiver. Pressing
CLEAR
resets the System
as shown below.
• AV SELECTION resets to STANDARD
• TV channel resets to channel 1
• Multiscreen resets to normal
• Audio setting initialises
• SRS resets to Off.
• Image position is initialises
I NOTE >
• Pressing CLEAR will not work if the System is in standby mode but the indicator lights red.
• Pressing CLEAR will not delete channel preset or password. See Page 54 for initialising factory preset settings when you
know your password. See Page 63 for initialising factory preset values when you have forgotten your password.
Rear view
INPUT 3 terminals (Y, P
b
, P
r
)
RS-232C terminal
(used in the factory setup)
(
GB)-10